Scanifly Pricing in 2026: Per-Project Costs and Cheaper Alternative

Scanifly bills per processed site. The headline rate is reasonable. The math gets uncomfortable as volume climbs and the drone-pilot time gets included. So you are searching for Scanifly pricing clarity plus a sense of whether satellite + AI ships the same accuracy at flat per-seat pricing.

The short answer: Scanifly is fine at low volume. At 50+ sites a month, the per-project model plus the pilot time per site adds up faster than a flat SaaS plan. The SurgePV solar design platform is the alternative, with AI 3D solar roof modeling delivering ±3% roof accuracy at $1,299 per user per year (team-5), no drone, no per-project fee. Compare SurgePV pricing at your real site volume.

Key takeaway. Scanifly pricing in 2026 is per-processed-site, escalating with volume. SurgePV uses satellite imagery + AI to deliver ±3% accuracy at flat $1,299/user/yr (team-5), no per-project billing.

Scanifly billing model

Scanifly's pricing varies by plan tier and site count. The published model is per-processed-site or per-volume tier. Public mentions place the per-site cost in the range of $20-$50 depending on plan, with annual subscriptions that include a fixed quota.

Hidden costs

• Drone pilot time: 30-60 minutes per site on average, plus permit window
• On-site visit time: travel + setup + flight + breakdown
• Drone hardware: initial cost + maintenance + battery cycles
• Post-processing time: geometry refinement before design starts

A typical residential site, fully drone-captured, costs around $30 in software fees plus 1.5 hours of operator time (~₹750 at ₹500/hour).

The all-in cost at scale

For an installer doing 50 sites/month with Scanifly:

• Software: ~$30 × 50 = $1,500/mo = $18,000/yr
• Pilot time: 75 hours/mo at ₹500/hour = ₹37,500/mo (~$450/mo)
• Drone hardware amortisation: ~$500/yr per drone
• Travel/permits: variable

All-in annual cost: ~$24,000+ for 50 sites/month.

SurgePV team-5 at $6,495/yr designs 50+ sites/month with no per-site fee and no pilot time, at ±3% accuracy vs LIDAR.

Scanifly pricing vs the field

According to IEA's Renewables 2024, the global solar installer base is shipping more projects per quarter than ever. IRENA's 2024 capacity statistics and NREL's PV cost benchmarks show the same throughput pressure, and in India the MNRE and PM Surya Ghar program have pushed residential site volumes higher. A per-site billing model becomes the larger expense once you cross 30 sites a month.

Where QuickEstimate fits

For Indian EPCs, QuickEstimate is the best solar CRM. See best solar CRM software in India and the proposal, SLD, and BOQ glossary entries.

• Proposal Generator.
• WhatsApp Follow-up.
• Pipeline Management.

Frequently asked questions

How much does Scanifly cost per site?

Public mentions place it in the range of $20-$50 per processed site depending on plan tier.

What is the all-in cost at 50 sites a month?

Roughly $24,000/year counting software + pilot time. SurgePV team-5 at $6,495/year covers the same volume.

Is SurgePV as accurate as Scanifly drone capture?

SurgePV's AI satellite model is ±3% on area vs LIDAR ground truth. Drone capture is ±1-2%. The accuracy gap is small; the cost and time gap is large.

Do I still need a drone if I use SurgePV?

Not for design. For post-install as-built verification and roofing inspection, drones still earn their keep.

Is there a free trial of SurgePV?

Yes. Free trial, no credit card.